air cooled water chiller Manufacturers

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 200KG output. Chiller. The extrusion capacity is 200KG/H. The chilled water flow rate is 5.0m³/H. If it is an air-cooled chiller, choose 10HP cooling capacity, and the model is JSFL-10. If it is a water-cooled chiller, choose 10HP cooling capacity. The model is JSSL-10. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

On May 27, 2022, after pilot testing, Jiusheng Machinery delivered a customized 10hp explosion-proof water-cooled portable box chiller to a domestic chemical facility.

It is well known that the counter-flow cooling tower is one of the most popular devices applied by the water-cooled chiller system. However, do you know what characters does a counter-flow cooling tower have? Please see the concluded brief tips as below:

The evaporator is one of the four core components of the chiller. In the evaporator, the refrigerant enters as a low-pressure liquid/vapor mixture and leaves as a low-pressure gas. At a constant temperature, the state changes from liquid to gas and absorbs energy. The evaporator of the chiller realizes superheated refrigerant vapor.

For water-cooled chillers, it is important to install a filter at the inlet of the condenser, because in most cases, the water in the cooling tower contains foreign matter. You can choose the appropriate filtration system according to your own situation at any time.

During the concrete mixing process, the internal volume of the concrete hydration heat increases, especially under high temperature conditions, the heat generated by mixing is higher. In the future maintenance or low temperature, the internal volume of the concrete will decrease due to thermal expansion and contraction. Without cooling and cooling, the hardening will be endangered, such as surface cracking, increased hardening time, and quality degradation.