air cooled chiller unit Manufacturers

The clamping force of the injection molding machine is 2400T-3200T, and the molding capacity is 240kg/H-320kg/H. If it is an air-cooled chiller, choose 40HP cooling capacity, and the model is XYFL-40. If it is a water-cooled chiller, choose 40HP cooling capacity. The model is XYSL-40. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

Chillers are commonly known as freezers, refrigerators, ice water machines, chillers, cooling machines, etc., because they are widely used in various industries, so there are countless names. The principle of its nature is a versatile machine that removes liquid vapor through compression or heat absorption refrigeration cycles.

Circuit problem: It may be that the power supply voltage is abnormal or the phase is missing. The circuit needs to be checked and repaired. At the same time, check whether the wires in the cooling circulation system of the air-cooled chiller are in good contact and whether there are any problems such as looseness.

​This is a 5-horsepower evaporative cooling air conditioner, which is about 40-50% more energy-efficient than traditional central air conditioners. It consumes about 3.6 degrees of electricity per hour, while central air conditioners consume about 9 degrees of electricity per hour. It consists of refrigeration components such as compressors, condensers, evaporators, expansion valves, wet curtains and water pumps. Its advantages are not only energy-saving, but also easy to install.

Water-cooled chillers provide efficient and effective solutions for cooling in various industrial processes. Their function is to circulate chilled water through a closed-loop system to transfer heat from manufacturing or commercial processes to the atmosphere.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 400KG output. Chiller. The extrusion capacity is 400KG/H. The chilled water flow rate is 10m³/H. If it is an air-cooled chiller, choose 20HP cooling capacity, and the model is JSFL-20. If it is a water-cooled chiller, choose 20HP cooling capacity. The model is JSSL-20. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.