water cooled liquid chiller Manufacturers

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the 800KG extruder Chiller. Extrusion capacity 800KG/H. The chilled water flow rate is 20m³/H. If it is an air-cooled chiller, choose 40HP cooling capacity, and the model is JSFL-40. If it is a water-cooled chiller, choose 40HP cooling capacity. The model is JSSL-40. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die head, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type).

What is the difference between an explosion-proof chiller and a standard chiller? The explosion-proof chiller has one more explosion-proof function than the standard chiller.

This article introduces the maintenance of water-cooled chillers.

If you want to understand the cause of the failure of the chiller water pump, you must use a reasonable and scientific method to repair it, which can effectively increase the service life of the chiller. Therefore, the chiller water pump is very important in the cooling process of the chiller. Through the following comprehensive analysis of the reasons for the failure of the water pump of the chiller and the solutions, we hope to provide help to the users of the chiller in the use and maintenance of the chiller.