vertical plastic color mixer Manufacturers

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type).

The cleaning method of the water-cooled screw chiller includes power off and shutdown of the chiller, cleaning of the condenser and cooling tower, cleaning of the screw compressor, inspection of pipes and valves, emptying of residual moisture, inspection of the electrical system, re-powering and running tests. The cleaning unit needs to be operated carefully, and the operating instructions and safety regulations of the unit should be followed.

Circuit problem: It may be that the power supply voltage is abnormal or the phase is missing. The circuit needs to be checked and repaired. At the same time, check whether the wires in the cooling circulation system of the air-cooled chiller are in good contact and whether there are any problems such as looseness.

When the user receives the mold temperature controller, you should check whether the appearance is damaged after unpacking. If there is any damage, please do not sign for it. Take pictures and contact the manufacturer for assistance. If everything is normal, you can start the mold temperature according to the following simple steps. machine.

​When discussing the application fields of water-cooled chillers and air-cooled chillers, we have to deeply understand the core principles, advantages and applicable environments of these two cooling systems in order to provide more accurate and efficient cooling solutions for different industries.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 400KG output. Chiller. The extrusion capacity is 400KG/H. The chilled water flow rate is 10m³/H. If it is an air-cooled chiller, choose 20HP cooling capacity, and the model is JSFL-20. If it is a water-cooled chiller, choose 20HP cooling capacity. The model is JSSL-20. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.