stainless steel mixer Manufacturers

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the 600KG extruder Chiller. The extrusion capacity is 600KG/H. The chilled water flow rate is 15m³/H. If it is an air-cooled chiller, choose 30HP cooling capacity, and the model is JSFL-30. If it is a water-cooled chiller, choose 30HP cooling capacity. The model is JSSL-30. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

​This is a 5-horsepower evaporative cooling air conditioner, which is about 40-50% more energy-efficient than traditional central air conditioners. It consumes about 3.6 degrees of electricity per hour, while central air conditioners consume about 9 degrees of electricity per hour. It consists of refrigeration components such as compressors, condensers, evaporators, expansion valves, wet curtains and water pumps. Its advantages are not only energy-saving, but also easy to install.

Air - cooled chiller and water - cooled chiller actually refrigeration principle is the same. Many guests think that the air-cooled cooling medium is air, and the water-cooled cooling medium is water. In fact, both cooling media are water, and the two are just different ways of cooling.

The suction pressure is lower than normal due to insufficient cooling capacity, low cold load, low expansion valve opening, low condensing pressure (with capillary system), and filter obstruction.

Properly open the mixed gas inlet valve to allow the mixed gas in the refrigeration system of the industrial chiller to enter the air separator.