3 in 1 hopper dryer Manufacturers

No industrial process, machine or motor can be 100% efficient. The heat they generate is the most common side effect of these inefficiencies. If this heat is not removed, it will accumulate over time, leading to shortening of production time, equipment downtime, and even premature equipment failure leading to the early end of life of the machine. Therefore, it is necessary to incorporate the cooling of the chiller into the industrial process system design to avoid these problems.

In the grinding process of the grinding machine industry, the three-roll machine will generate a higher temperature during grinding. High temperature will affect the working efficiency of the machine, the quality of raw materials, and cause damage to the equipment. At this time, chillers are often used to cool down and reduce the temperature of the mill to protect the equipment. The application of industrial cold water in the sand mill industry mainly includes heat dissipation and cooling, cleaning grinding chips, cooling grinding wheels, cleaning cutting fluid and controlling workpiece temperature, etc., which means improving work efficiency and processing quality and prolonging equipment life.

When the heat dissipation of the cooler of the industrial air cooler is poor, the compression and efficiency are low, and the operating current increases.

With the popularity of industrial chillers, users can master the use of industrial chillers when using industrial chillers, but they have little knowledge about the maintenance of industrial chillers, so industrial chillers are prone to serious failures. Affect the safe and stable operation of the chiller.

The condenser is a basic component in the chiller system, as important as the compressor and the evaporator, and its working conditions will affect the overall efficiency of the chiller. Here are some ways to improve the efficiency of the condenser. 　　1, condenser capacity 　　Calculate the condenser capacity based on the surface area of ​​the condenser instead of th

The 9KW water-carrying mold temperature controller is an environmentally friendly heating device, which can provide 9KW heating, and the temperature is 30-120°C. It can be customized up to 180°C super-boiling high-temperature water-type mold temperature controller. Mainly used in mold heating and constant temperature control.