air cooled screw type chiller Manufacturers

When enterprises use air-cooled chillers, if there are many inappropriate factors in the environment, other industrial chillers will also experience increasing energy consumption. Measures to alleviate excessive energy consumption of air-cooled water machines include: optimizing equipment selection, improving equipment efficiency, controlling equipment operating parameters, using frequency conversion speed regulation technology, regularly inspecting equipment, heat recovery and utilization, and standardized operation management.

​This is a 5-horsepower evaporative cooling air conditioner, which is about 40-50% more energy-efficient than traditional central air conditioners. It consumes about 3.6 degrees of electricity per hour, while central air conditioners consume about 9 degrees of electricity per hour. It consists of refrigeration components such as compressors, condensers, evaporators, expansion valves, wet curtains and water pumps. Its advantages are not only energy-saving, but also easy to install.

The clamping force of the injection molding machine is 3200T-4000T, and the molding capacity is 320kg/H-400kg/H. If it is an air-cooled chiller, choose 50HP cooling capacity, and the model is JSFL-50. If it is a water-cooled chiller, choose 50HP cooling capacity. The model is XYSL-50. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower.

The condenser is a device that emits heat, and transfers the heat absorbed in the evaporator together with the heat converted by the work of the compressor to the cooling medium to take away.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 200KG output. Chiller. The extrusion capacity is 200KG/H. The chilled water flow rate is 5.0m³/H. If it is an air-cooled chiller, choose 10HP cooling capacity, and the model is JSFL-10. If it is a water-cooled chiller, choose 10HP cooling capacity. The model is JSSL-10. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.