european dryer Manufacturers

The reason for the low suction pressure of the chiller may be the problem of the water pump, the liquid level of the water tank and the connection of the water pipe. Solutions to these problems include checking the water pump for leaks or clogs to make sure the pump is functioning properly; checking the tank level to rule out leaks or water leaks in the system; and checking that plumbing connections are tight to rule out leaks or loose connections. If the problem persists, it is recommended to contact professional chiller maintenance service personnel for inspection and maintenance.

Many customers will encounter a problem, that is, what problems should be paid attention to during the operation of industrial chillers? The following Dongguan Jiusheng Co., Ltd. will tell you about it:

The clamping force of the injection molding machine is 160T, and the molding capacity is 16KG/H. If it is an air-cooled chiller, choose 2HP cooling capacity, and the model is XYFL-02.

The water-cooled chiller achieves heat management of the equipment through a closed circulation system, and its operation depends on the physical transformation process of the refrigerant between specific components.

Concrete mixing plant is a common construction equipment. Concrete mixing plant needs to use a lot of concrete in the production process. During the production process of concrete, water needs to be continuously added to adjust its viscosity and fluidity. Therefore, cooling water is needed to control the concrete temperature.

When the water temperature is above 5°C and the pressure on the low-pressure gauge shows a low dryness of 2kg/cm2, it means that the industrial chiller/refrigerant is insufficient. Appropriate refrigerant.