cooling system Manufacturers

Chillers play an important role in the laser welding process. The chiller is mainly to cool the laser generator of the laser equipment through water circulation, and to control the use temperature of the laser generator, so that the laser generator can keep working normally for a long time. During the long-term operation of laser equipment, the laser generator will continue to generate high temperature. If the temperature is too high, it will affect the normal operation of the laser generator and be easily damaged.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 200KG output. Chiller. The extrusion capacity is 200KG/H. The chilled water flow rate is 5.0m³/H. If it is an air-cooled chiller, choose 10HP cooling capacity, and the model is JSFL-10. If it is a water-cooled chiller, choose 10HP cooling capacity. The model is JSSL-10. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

At this stage, the international influence and supply of my country's new energy batteries are increasing, and the production lines of new energy battery production plants are also being updated to meet high-performance battery products and to solve the current cooling requirements of new energy battery production lines. Therefore, the dedicated supporting chiller equipment is also advancing with the times, which puts forward higher technical requirements for chiller enterprises.

An air-cooled chiller is a type of cooling system designed to remove heat from a space or process by utilizing ambient air as the cooling medium. This technology is widely employed in various industrial, commercial, and even residential applications where efficient and cost-effective cooling is required.

When the heat dissipation of the cooler of the industrial air cooler is poor, the compression and efficiency are low, and the operating current increases.

Properly open the mixed gas inlet valve to allow the mixed gas in the refrigeration system of the industrial chiller to enter the air separator.