round tower Manufacturers

As the core component of a chiller, a compressor can account for 30% to 40% of the cost of the entire chiller . The quality of the refrigeration system is also closely related to the compressor. Therefore, It is very important to have an understanding of the compressor used in the machine before purchasing a chiller. A good compressor will have better performance in terms of service life, noise and energy efficiency ratio . Scroll compressors are the most commonly used compressors for box-type industrial chillers, either air-cooled or water-cooled.

Industrial chillers are assembled from multiple machines and equipment such as condensers, evaporators, and compressors. The reasons for the poor cooling effect of industrial chillers include cooling system failure, unreasonable cooling system design, and poor circulating water quality. The normal operation of the chiller is essential for daily maintenance.

No industrial process, machine or motor can be 100% efficient. The heat they generate is the most common side effect of these inefficiencies. If this heat is not removed, it will accumulate over time, leading to shortening of production time, equipment downtime, and even premature equipment failure leading to the early end of life of the machine. Therefore, it is necessary to incorporate the cooling of the chiller into the industrial process system design to avoid these problems.

What kind of equipment is a milk chiller? It is a kind of refrigeration equipment that cools the freshly squeezed milk from 36°C to 4~5°C in 2~3 hours. It is also one of the equipment used by many dairy companies. Since the temperature of the milk that has just been squeezed out is relatively high, it is not conducive to preservation, so it is also necessary to use a cold milk chiller to cool down and pasteurization and other technologies for final storage.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller.

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the 600KG extruder Chiller. The extrusion capacity is 600KG/H. The chilled water flow rate is 15m³/H. If it is an air-cooled chiller, choose 30HP cooling capacity, and the model is JSFL-30. If it is a water-cooled chiller, choose 30HP cooling capacity. The model is JSSL-30. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.