plastic vacuum auto feeder Manufacturers

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 400KG output. Chiller. The extrusion capacity is 400KG/H. The chilled water flow rate is 10m³/H. If it is an air-cooled chiller, choose 20HP cooling capacity, and the model is JSFL-20. If it is a water-cooled chiller, choose 20HP cooling capacity. The model is JSSL-20. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

​This is a 5-horsepower evaporative cooling air conditioner, which is about 40-50% more energy-efficient than traditional central air conditioners. It consumes about 3.6 degrees of electricity per hour, while central air conditioners consume about 9 degrees of electricity per hour. It consists of refrigeration components such as compressors, condensers, evaporators, expansion valves, wet curtains and water pumps. Its advantages are not only energy-saving, but also easy to install.

The cleaning method of the water-cooled screw chiller includes power off and shutdown of the chiller, cleaning of the condenser and cooling tower, cleaning of the screw compressor, inspection of pipes and valves, emptying of residual moisture, inspection of the electrical system, re-powering and running tests. The cleaning unit needs to be operated carefully, and the operating instructions and safety regulations of the unit should be followed.

The analysis and solution of the chiller failure depends on the specific failure situation. If the chiller fails, it must be dealt with in a professional way in time to ensure the safe and stable operation of the chiller; and regularly check whether the various parts of the chiller are worn or damaged. If it is damaged, it should be replaced in time. In addition, when purchasing chillers, enterprises should reasonably match the chillers according to production needs, so as to better use Jiusheng chillers and achieve the effect of reducing the use cost of enterprises.

The clamping force of the injection molding machine is 640T-800T, and the molding capacity is 64kg/H-80kg/H. If it is an air-cooled chiller, choose 10HP cooling capacity, and the model is XYFL-10. If it is a water-cooled chiller, choose 10HP cooling capacity. The model is XYSL-10. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

The screw chiller lowers the temperature of the sand mill by exchanging heat between the cooling medium (such as cooling water or cooling oil) and the sand mill.