cross flow cooling tower Manufacturers

The industrial oil cooler is a kind of precision chiller, which is controlled by PID system, adopts imported thermostat, and the temperature accuracy is ±1℃. Imported high temperature resistant pump, high pressure and large flow, achieve the best exchange efficiency. Selected high-efficiency electric heating tube for long service life.

The application of the chiller in the rubber mixing machine industry can greatly improve the surface finish of the product, reduce the surface marks and internal stress of the product, keep the product from shrinking or deforming, facilitate the demoulding of the product, and speed up the shaping of the product, thereby greatly improving plastic molding. machine productivity.

The reason for the low suction pressure of the chiller may be the problem of the water pump, the liquid level of the water tank and the connection of the water pipe. Solutions to these problems include checking the water pump for leaks or clogs to make sure the pump is functioning properly; checking the tank level to rule out leaks or water leaks in the system; and checking that plumbing connections are tight to rule out leaks or loose connections. If the problem persists, it is recommended to contact professional chiller maintenance service personnel for inspection and maintenance.

Chillers are generally divided into water-cooled chillers and air-cooled chillers. Air-cooled chillers are often used in areas with tight water resources; the following is a comprehensive analysis and comparison of the characteristics of air-cooled chillers and water-cooled chillers. I hope it will be helpful to you.

As the Spring Festival of 2024 is approaching, first of all, we would like to thank our customers and suppliers for their support and help to Dongguan Jiusheng Machinery Co., Ltd. this year. All the staff of Jiusheng Company wish you and your family a happy New Year and all the best. Good luck in the year!

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the 600KG extruder Chiller. The extrusion capacity is 600KG/H. The chilled water flow rate is 15m³/H. If it is an air-cooled chiller, choose 30HP cooling capacity, and the model is JSFL-30. If it is a water-cooled chiller, choose 30HP cooling capacity. The model is JSSL-30. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.