counter flow cooling tower Manufacturers

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 400KG output. Chiller. The extrusion capacity is 400KG/H. The chilled water flow rate is 10m³/H. If it is an air-cooled chiller, choose 20HP cooling capacity, and the model is JSFL-20. If it is a water-cooled chiller, choose 20HP cooling capacity. The model is JSSL-20. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

On August 6, 2022, a 3HP oil cooler packed with plywood case is delivered to freight forwarder for arranging shipment by sea from Shenzhen to Singapore.

The daily maintenance methods of low temperature chillers include cleaning condensers and cooling towers, checking pipes and valves, maintaining electrical systems, preventing condensation in condensers, replacing filter screens regularly, paying attention to operating parameters, and regular maintenance and maintenance.

Some things you need to know about the selection of a screw chiller! Because its key component, the compressor, adopts a screw type, it is named a screw chiller. It can be divided into two types according to different heat dissipation methods: water-cooled screw chillers and air-cooled screw chillers. The cooling capacity of screw chillers ranges from 100kw/h to 860kw/h.

When enterprises use air-cooled chillers, if there are many inappropriate factors in the environment, other industrial chillers will also experience increasing energy consumption. Measures to alleviate excessive energy consumption of air-cooled water machines include: optimizing equipment selection, improving equipment efficiency, controlling equipment operating parameters, using frequency conversion speed regulation technology, regularly inspecting equipment, heat recovery and utilization, and standardized operation management.

Circuit problem: It may be that the power supply voltage is abnormal or the phase is missing. The circuit needs to be checked and repaired. At the same time, check whether the wires in the cooling circulation system of the air-cooled chiller are in good contact and whether there are any problems such as looseness.