Home > News

Industry News

What is the method of venting the industrial chiller in the ammonia refrigeration system?

Properly open the mixed gas inlet valve to allow the mixed gas in the refrigeration system of the industrial chiller to enter the air separator.

What is the low-pressure treatment method for industrial chillers/refrigerant shortage?

When the water temperature is above 5°C and the pressure on the low-pressure gauge shows a low dryness of 2kg/cm2, it means that the industrial chiller/refrigerant is insufficient. Appropriate refrigerant.

What are the industrial chillers/poor heat dissipation and treatment methods?

When the heat dissipation of the cooler of the industrial air cooler is poor, the compression and efficiency are low, and the operating current increases.

Are there any regulations on the operation of drum type plastic mixer ? What is the process?

There are some operation rules and procedures of drum type plastic mixer:

How does the chiller work?

In the industry, the chiller is divided into air cooled chiller and water cooled chiller. In terms of temperature control, the chiller is divided into low temperature chiller and normal temperature chiller. The normal temperature is generally controlled in the range of 0 degrees to 35 degrees. Cryog......

The reason of high pressure alarm of chiller and its solution.

If it is an air cooler box chiller, professional and technical personnel should check whether the installation working temperature exceeds 40℃, and if it exceeds it, they should dissipate heat immediately, because the refrigeration water output is too small, or the temperature is too high and the he......

<...18 19 20 21 22...30 >

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy

Reject Accept